|
SCES Air Conditioning are proud to the be the UK's
sole distributor of this revolutionary Australian pump.
The innovative, Long Lasting, Air Operated FERI Submersible Well/Bore/Sump Pump.
The Feri submersible pump is a simple, cost effective, versatile, tough and ultra lightweight, maintenance free alternative to highly expensive conventional electric pumps.
It cannot seize, corrode or burn out. It will not suffer damage from pumping grit or sand, even If it runs dry!
The Feri pump was designed specifically to overcome the problems of corrosion, seizing when running dry or pumping sand or grit as well as making installation cheap and easy.
It is constructed entirely of tough non-metallic, non-corroding materials and only has 2 moving parts. The Feri is designed to utilise the forces of nature via your low pressure compressor to create the lift.
There are no troublesome electrics down the hole and no level instruments are required.
This unique submersible pump has been in production since 1987, and those first installed are still running today and totally maintenance free after 20 years!
The first of the Feri submersible well/bore pumps are still pumping today. Wear is negligible, as the only "moving" parts are 2 floating ball non-return valves. It will pump anything from clean water to gritty fluid.
The Feri submersible pump can run dry, without damage, it can pump minerals, shale and grit. There is no need for power at the pump site. It is air operated. Low pressure compressed air can be supplied from miles away if necessary, saving on running expensive power cables.
The Feri submersible pump is easy to install and can be relocated to different sites easily by just pulling it out by hand and moving it to a different location.
No support cables are required. It just hangs on the end of the delivery pipe - usually poly pipe, which is cheap and readily available.
Although the pump is nearly 2.5 meters long, it weighs only 4.5 kg. Please view the next page for further information on the Feri submersible pump. |